This browser does not support the video element.
dme brass pressure plugs give a high pressure seal through a deliberate difference of taper between the plug and the tapped hole.
flush seating is achieved through closer control of thread forms, sizes and taper
| Part No | TBP10,TBP20.... |
| Material | Brass |
| Shape | straight |
| Temperature Rage | -20℃ to max 160℃ |
| Working Pressure | 0-20bar |
| Mold | open flow |
Mould Coupling Water Manifold Mould Date Stamp Air Valve Slide Retainer Latch Lock Other Mold Part
phone
Fax